Ambicide 20lt

Instructions for Use:

Surface Disinfection:

The level of disease-causing organisms present after basic cleaning can remain high enough to offer a serious disease challenge. Using a disinfectant independently proven effective against viruses, bacteria, fungi and spores, such as Ambicide™, is essential.

Spraying:

Manually prepare a solution between 0.5 - 1% (1:200 - 1:100 dilution) of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using either a knapsack sprayer or pressure washer on a low pressure setting, spray the disinfectant solution on to pre-cleaned surfaces at an application rate of 300ml/m².

Foaming:

Manually prepare a 2% (1:50 dilution) solution of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using a pressure washer with a foaming lance apply Ambicide™ disinfectant solution to pre-cleaned surfaces at an application rate of 250ml/m².

Egg Disinfection - Setters and Eggs Stores Containing Eggs:

Manually prepare a 1% (1:100 dilution) solution of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using either a mechanical mist/cold fog generator, knapsack sprayer or pressure washer on a fine mist setting, apply Ambicide™ disinfectant solution for a period of 5-10 seconds per 3m3 to wet the surface of the egg or equipment.

Egg Disinfectant Dip:

Manually prepare a 1% (1:100 dilution) solution of Ambicide™ using warm water (38-41ºC) in a suitable container and dip hatching eggs for 2-3 minutes prior to placement in the hatching baskets.Vehicle Disinfection:Manually prepare a 1% (1:100 dilution) solution of Ambicide™ or calibrate your dosing equipment to achieve the required dilution. Using either a pressure washer or knapsack sprayer on a fine mist setting, apply the disinfectant solution to all surfaces of the vehicle including; wheel arches, mudguards and any exposed chassis.

Safety Data Sheet